Description
The Loxeal 58-11 High Pressure Thread Sealant 100ml is an anaerobic adhesive that is ideal for the sealing of threaded metal to metal joints. This Loxeal thread sealant seals against gas, water, LPG, hydrocarbons, oils and other chemicals. This Thread sealing adhesive replaces PTFE tape and yarn giving instant sealing against moderate pressure. It seals against gas, water, LPG, hydrocarbons, oils and other chemicals. Thixotropic property prevents migration of sealant from thread before or during curing. It is shock and vibration resistant, with sealing properties unaffected over the temperature range from -55°C to +150°C.
Features
| High viscosity – once oxygen is expelled from sealant it will activate and start to cure |
|
Drip proof 100mL Tube
|
| Sealing unaffected by shock/vibration within temperature range: -55°C to + 150°C |
| Rapid cure time - functional in less than 3 hours |
| Safe for use with potable water and AGA approved |
| Not suitable for use on plastics |
| Non-Toxic |
| Made In Italy |
- Application
- Kitchen, Laundry, Bathroom
- For use with
- LPG (Propane), NG, Water
- Pressure Rating (kPa)
- AGA approved to AS 4623:2008 - Class III (2000kPa), Approved by Loxeal s.r.l to 2,600 kPa
- Working Temp. Range (°C)
- -50°C to +150°C
- Composition
- Anaerobic Methacrylate
- Colour
- Yellow
- Viscosity (25°C - mPa.5)
- 24,000-70,000 (high thixotropy)
- Max. Diameter of thread/gap filling
- M 80 / 3° / 0.50mm
- Flash Point (°C)
- >100
- Shelf Life in Years (when stored at 23°C)
- 2
- Handling Cure Time
- 15-30 minutes
- Functional Cure Time
- 1-3 hours
- Full Cure Time
- 3-6 hours
- Shear Strength
- 6-12 N/mm²
- Locking Torque (breakaway & prevailing)
- 6-10 N/mm² & 2-4 N/mm²
- AGA Approval No.
- 5048
Technical-Data_Loxeal_FORGEPLUMBING.pdf
Download